Everyone is familiar with the treadmill, a staple exercising machine. It is a perfect machine for walking, running, and jogging purposes. If you are too lazy to dress up and go out for a walk, you can always hop on your treadmill with your pajamas. When it comes to the treadmill, there are plenty of things that you must be careful about, maintaining and caring for your machine – for instance.
The treadmill h with several important components that add up to its efficient performance. The belt is one such imperative part of your treadmill that needs to be taken care of. It is a rotating belt that allows you to walk over it. You need to maintain the right tension level in order to ensure that your belt is working properly. There are plenty of complications that can arise if you don’t consider the tightening of the tread belt.
Can You Over Tighten Treadmill Belt?
Certainly, there are plenty of ways in which you can end up over tightening the belt tension. However, it is highly important to not over tighten your belt as it can damage the walking belt and make it inefficient. It can also result in hazards that can even be dangerous to your health. It is b to put the belt tension in ¼ turn increments. You must also conduct a test walk at 3.0 speed before making further adjustments.
How to Tighten The Tread Belt?
It is important to learn how to tighten the belt by yourself. Adjusting the tread belt is super simple if you follow the right steps. Here are a few easy steps that you must follow to adjust the tension of your tread belt.
First, you must run a test to ascertain whether your belt needs an adjustment or not. For this, walk on the treadmill at the lowest speed. You must be able to walk over the belt without slipping; also, you will witness ridges and grooves if the belt is too loose. While walking, check your feet to ensure if the alignment is off or not. This examination will give you an idea of where to start and how to make the best adjustment.
Once ascertaining that your tread belt needs adjustment, you must begin with conducting the tension adjustment. Before you start any maintenance practice, it is important to turn off the treadmill and unplug it from the socket. You need to work with the internal parts of the machine, and a little charge can lead to fatal shocks.
Next up, you need to look for the belt adjustment bolt that is found at the base of your treadmill. Typically, you can find the bolt at the rear of the treadmill deck. If you cannot find the belt, don’t waste much time on it, and refer to your owner’s manual to find the right spot. Without spotting the right location of the adjustment bolt, you won’t be able to go further.
Now, use a wrench to lose the belt in case the alignment of your belt is off. When you loosen the belt, you will be able to move the belt left or right. Try to adjust it properly according to your preference. Try to align it with the treadmill deck to make the slightly off alignment perfectly alright.
You need to reach the same wrench to the bolt and give it a ¼ tun in the clockwise direction to fix the tension issue. Adjust it according to the losing or tightening of the belt. You must check how much you need to tighten and then move the bolt accordingly in the right direction.
After doing all the steps, you must recheck the tension of the belt. Now, you need to plug in the treadmill and conduct a test run before you can start using the machine again. Set the treadmill to the lowest setting and start walking on it. You must not feel slippery while walking and must not see ridges on the surface. If there is any issue, you must start all the process again.
A bare minimum tension adjustment can be don’t by yourself. However, if the issue is severe and you think you won’t be able to handle it, you must seek help from a technician.
What If Tightening Doesn’t Improve The Performance?
There are instances where just tightening can help you improve the situation. You will need to do something extra in order to get things right. For instance, if you own an old treadmill, there are majority chances that tightening won’t help your case. Older belts tend to stretch out to the maximum, and you cannot possibly tighten them. In such cases, it’s better to replace the belt altogether. You must also seek guidance from a treadmill technician who can better inspect the issue and find the right solution for it.
Do New Treadmills Require Belt Adjustment?
Treadmills vary from model to model, and generally, new treadmills don’t require a belt adjustment. However, there are some belts that need a little tweak before starting to walk on them. Hence, it is best advised to run a test walk before you exhaust your treadmill. When you buy a treadmill from a dealer, you must ask them about all the details regarding the belt adjustment. Only then will you be able to make the most of the product.
Why Is Your Belt Slipping?
The slipping of the treadmill belt is a major issue that will haunt you. Every now and then you need to run a test to ensure that your belt is in the right condition. But what actually causes the slipping of the belt? Here are a few common reasons why it might be happening:
- Your belt needs lubrication
- The drive belt is completely loose
- The front row pulley might have lost all the grip
- The walking belt may be loose
These are some of the commonly witnessed reasons that you might be aware of. You must never ignore the signs that your machine gives regarding slippage, as it may lead to severe issues that can be detrimental to you and your machine.
What To Do If The Treadmill Belt Is Slipping?
Slipping of the treadmill belt is a common issue found in the machine. It is important to address the issue at the earliest before it can damage your entire machine. If there is a slippage issue, you must align and tighten the running belt. Generally, the belts tend to slip when there is a lot of friction or when the belt is overly tight. You can also check if the belt is too tight for the deck. Just lift it from the center and see if there is a gap of approximately two-three inches. If there is not enough gap, you must try to loosen the belt a bit and make sure it perfectly aligns with the deck.
How Often Should You Change A Treadmill Belt?
Not just checking the belt’s tension, it is also important to inspect it for wear and tear at least once in three months. This will allow you to understand placement and the condition of your belt and ascertain whether the belt needs to replace. You can check the belt by running your hands underside of the belt and check if it is worn and rough from beneath. If you see issues in your belt, you must not wait and replace it at the earliest. Having a loose tread belt can disrupt your walking experience and damage your motor as well. You must conduct regular care and maintenance practice to ensure that everything is under check, and you are not running on a worn-out belt. So, it is highly essential to change the belt whenever needed.